| car dismantling shear | ||||
| item/model | unit | ET04 | ET06 | ET08 |
| suitable excavator | ton | 6-10 | 12-16 | 20-35 |
| weight | kg | 410 | 1000 | 1900 |
| opening with jaw | mm | 420 | 770 | 850 |
| overall length | mm | 1471 | 2230 | 2565 |
| blade length | mm | 230 | 440 | 457 |
| maximum cutting force(blade middle) | ton | 45 | 60 | 80 |
| driving pressure | kgf/cm2 | 180 | 210 | 260 |
| driving flow | l/min | 50-130 | 100-180 | 180-230 |
| motor set up pressure | kgf/cm2 | 150 | 150 | 150 |
| motor flow | l/min | 30-35 | 36-40 | 36-40 |
| item/model | unit | ET06 | ET08 | |
| weight | kg | 2160 | 4200 | |
| suitable excavator | ton |
12-18 |
20-35 | |
| swing height | max | mm | 1800 | 2200 |
| min | mm | 0 | 0 | |
| opening | max | mm | 2860 | 3287 |
| min | mm | 880 | 1072 | |
| length | mm | 4650 | 5500 | |
| height | mm | 1000 | 1100 | |
| width | mm | 2150 | 2772 | |
| there are two kinds of options: one is four movements (can achieve tension, clamping, up, and down) and the other is two movements (only up and down). | ||||
Application: only applicable to all types of scrapped cars.
Feature:
(1)The knife body is made of height NM 400, long-wear-resistant, and other structural parts are made of Q345B manganese plate,High strength and strong toughness.
(2)Special material customized blade can be used alternately on all sides, high wear resistance and strong utilization rate greatly reduce the replacement cost of vulnerable parts.
(3)Reasonable closed structure design reinforced cylinder greatly improve the shear tear force to avoid collision cylinder damage oil leakage.
(4)Advanced integrated circuit control system makes operators easier to operate with sensitive action,which improves the efficiency of disassembly.
(5)The large displacement rotary device with closed-loop design has high torque and high stability, which makes the whole machine has superior service life and low safe and efficient late maintenance cos.
Note: The car dismantling should try to avoid load rotation, don"t make rotating action when tearing!
Clamp arm:
(1)Made of altitude manganese plate, lightweight design, high strength and toughness to meet all kinds of harsh disassembly conditions.
(2)Advanced integrated valve block hydraulic oil road design has convenient installation and maintenance action, sensitive clamp tension does not drop the cylinder.
(3)Advanced reinforced cylinder design lifts high, opening degree meets the requirements of various types of vehicles.
(4)It adopts the detachable type design.
