After the excavator is equipped with the pulverizer, there are the following points to pay attention to and prevent in daily use and maintenance:
1.The excavator pulverizer teeth: When teeth are severely deformed, it is very difficult to replace them. Therefore, after every 100 to 150 hours of work, some wear-resistant welding rods should be added to the teeth to increase the wear resistance of the teeth, and the excavator pulverizer should be used to ensure that the front teeth do not hit hard objects forward to avoid damage.
2 A blade: the Alloy blade usually is inside the mouth of the hydraulic crushing pliers, the upper and lower two pieces with knife holders. The blade is mainly used to shear steel, if used to shear concrete or beyond the shear range of steel, it will cause wear or damage to the blade can not be used, in this case it is necessary to replace the blade, so be sure to pay attention when using.
3.Hydraulic excavator pulverizer easily damaged accessories also includes piston rod front cover, pin, tubing joints, hydraulic seals, cylinder support bolts, hydraulic hoses, etc. Therefore, every excavator should always be equipped with these accessories in case of emergency. In addition, the actual work requires the replacement of hydraulic seals every 600 hours.
4.All the key shaft parts of the excavator pulverizer are reserved for butter nozzle, and the driver should grease at least twice a day to improve the wear resistance and service life of the key parts of the movement.
Post time: Sep-12-2024