What excavator data is needed to customize quick connectors

Characteristics of the quick connector for excavators:

No.1:Use high-strength materials; It is applicable to various models with tonnage ranging from 3 to 80.

No.2: Use the safety device of the hydraulic check valve to ensure safety;

No.3:The excavator’s configuration parts do not need to be modified and can be replaced without disassembling the pins, thus enabling quick installation and significantly enhancing work efficiency.

No.4: There is no need for manual smashing of the bucket pin between the breaker hammer and the bucket. Just gently move the switch for ten seconds to complete the interchange between the bucket and the breaker hammer, which saves time and effort and is simple and convenient.

No.5: It is mainly applied in working environments where the front-end working devices of excavators need to be frequently replaced. When using one device for a long time, it is advisable not to install it.

To customize the connector, the data shown in the above our figure needs to be provided in order to apply it well without failure。